LMG II products specifications

Please oder LMG in combination of a sensor and a display unit.

Sensor

Å@Å@Å@Å@ MODEL

ITEMS		 ÇkÇlÇf
ÇOÇPÇUáU 		ÇkÇlÇf
ÇPÇQÇUáU 		ÇkÇlÇf
ÇRÇOÇOáU 		ÇkÇlÇf
ÇRÇOÇTáU 		ÇkÇlÇf
ÇUÇOÇUáU 		ÇkÇlÇf
ÇWÇOÇOáU 		ÇkÇlÇf
ÇWÇOÇTáU 		ÇkÇlÇf
ÇPÇTÇOÇTáU 		ÇkÇlÇf
ÇvÇQÇQÇOÇTáU
PDF PDF PDF PDF PDF PDF PDF PDF PDF
Light source Visible Diode Laser (Wave Length : 655nm)
Measuring range
(mm)		 0.01 - 2 0.05 - 12 0.2 - 30 0.2 - 30 0.5 - 60 0.5 - 80 0.5 - 80 0.7 - 150 0.7 - 220
Resolution ÇOÅDÇOÇTÅ@ÅiÇPÅjÉ Çç ÇOÅDÇPÅiÇPÅjÉ Çç ÇPÉ Çç
ÇOÅDÇOÇOÇOÇOÇOÇQÅi0.0001Åj inch ÇOÅDÇOÇOÇOÇOÇPÅi0.0001Åj inch ÇOÅDÇOÇOÇOÇP inch
Accuracy
*1
Total
(µm)		 Å}0.3 Å}ÇP Å}ÇQ Å}ÇR Å}ÇS Å}ÇS Å}ÇT Å}ÇPÇQ(Å}ÇTÅj*2 Å}ÇPÇT (Å}ÇTÅj*3
Linearity
(µm)		 Å}0.3 Å}0.5 Å}1.5 Å}2.0 Å}2.5 Å}2.5 Å}4 Å}8(Å}4)
*2		 Å}12(Å}4)
*3
Repeatability
(µm)		 Å}0.2 Å}0.2 Å}0.3 Å}0.5 Å}0.5 Å}0.5 Å}ÇP Å}2(Å}ÇP)
*2		 Å@Å}2(Å}ÇP)
*3
Scanning freq. 1800 / s
Scanning speed (m/s) 42 110 175 175 350 350 420 560 420
Operation temp
(deg.C)		 0 - 45
Weight
(kg)
Trasmitter Å@Å@Å@Å@ Å@Å@Å@ 1.7 Å@Å@ 2.2 5.0 4.0 7.5 20.0
Receiver Å@Å@ Å@Å@Å@ 1.0 Å@Å@ 1.0 3.0 2.0 4.5 6.0
Base plate Å@Å@ Å@Å@ 1.5 Å@Å@ 1.6 4.0 3.0 4.5 7.0
Weight(kg)
Total		 2.0 2.5 4.2 3.0 4.8 12.0 9.0 16.5 33.0

*1 At ambient temparature of 20±5 deg.C. Number of data to obtain a mean value : More than 512 data
(Display interval : More than 0.3ms)
*2 ( ) : Up to 80mm
*3 ( ) : At lower measuring area

Display Unit

Specifications D5 MIII
Number of connecting sensors 1 2
Display Two measuring values can be displayed at the same time. Measuring values of two sensors can be displayed alternately with a switch.
Display unit Selectable between mm and inch mm
Display interval 0.56ms to 4.5s Selectable : 5 kinds of interval registered
Nominal value Pre-settable for each measuring mode
Tolerance value Pre-settable each Hi tolerance and Lo tolerance
Measuring mode Selectable between 2 point diameters and 3 point gaps.
Data processing Mean value, Max. value, Min.value, Max-Min. value, etc.
Data output RS-232C, Analog±10V(Option :GP-IB, Centronics, BCD)
Alarm Out of tolerance: Lamp on relay output
Others Measurement by input signal. Offset. Zeroset, Calibration etc.
Weight 4kg
Power Source AC85V - 264V 50/60Hz 30VA


Standard accessories

  • Connecting cable between transmitter and receiver ·········· 1
  • Connecting cable between sensor and display(4m)Å@·········· 1
  • Power cable (2m) ························································· 1
  • Operation Manual ························································· 1

Options

  • Transparent object measuring function
  • Multi-segments measuring function of outer diameter and gap.
  • BCD,Centronics & GP-IB interface
  • Dustproof hood(for protection against dust)
  • Standard gauges
  • Design & production of measureing line
[Back to home] [Back to LMG home]