LMG 7 products specifications
Please oder LMG in combination of a sensor and a display unit.
Sensor
MODEL
ITEMS |
LMG 027 |
LMG 127 |
LMG 307 |
LMG 607 |
LMG 807 |
LMG 1507 |
| Dimensional drawing |
PDF |
PDF |
PDF |
PDF |
PDF |
PDF |
| Light source |
Visible Diode Laser (Wave Length : 655nm) |
Measuring range
(mm) |
0.01 - 2
|
0.05 - 12
|
0.2 - 30
|
0.5 - 60 |
0.5 - 80 |
0.7 - 150 |
| Resolution |
(micron) |
0.01 |
0.1 |
1 |
| (inch) |
0.000001 |
0.00001 |
0.0001 |
Measuring
area |
Vertical(mm) |
2 |
12 |
30 |
60 |
80 |
150 |
| Horizontal(mm) |
0 *2 |
4 (2) *3 |
10 |
30 |
40 |
20 |
Accuracy
*1
|
Reproducibility
(µm) |
+-0.5 |
+-1 |
+-2 |
+-4 |
+-5 |
+-12
(+-5）*4 |
Linearity
(µm) |
+-0.3 |
+-0.5 |
+-1.0 |
+-2.5 |
+-4 |
+-8
(+-4)*4 |
Repeatability
(µm) |
+-0.03 |
+-0.04 |
+-0.1 |
+-0.35 |
+-0.6 |
+-1.3
(+-1)*4 |
| Scanning freq. |
3600 / s |
| Scanning speed (m/s) |
85 |
226 |
355 |
707 |
990 |
1130 |
Operation temp
(deg.C) |
0 - 45
|
Weight
(kg)
|
Trasmitter |
2.0 |
2.5 |
2.7 |
- |
- |
- |
| Receiver |
- |
- |
- |
| Base plate |
- |
- |
- |
Weight(kg)
Total |
2.0 |
2.5 |
2.7 |
- |
- |
- |
*1 At ambient temparature of 20+-5 deg.C. About diameter measuring value of cylindrical gauges.
- Reproducibility
- Deviations of value measured in the length X and breadth Y area around
the measurement central position from the value measured at the central
position (X is 70% of the vertical length of its measuring area and Y is
50% of the horizontal length of it).
- Linearity
- Errors of different size objects measured at the measuring area center.
- Repeatability
- The value of +-2σ while measuring a gauge repeatedly in 0.25 second (896
average times) intervals at the measuring area center (σ: a standard deviation）
*2 At horizontal center only
*3 ( ) : For from 0.05mm to 0.1mm measuring objects
*4 ( ) : For up to 80mm diameters
*5 ( ) : At lower measuring area
Display Unit
| Specifications |
D7 |
D7-M |
| Number of connecting sensors |
1 |
2 |
| Dimensional drawing |
PDF |
| Display
|
Two measuring values can be displayed at the same time. |
| Display unit |
Selectable between mm and inch |
| Display interval
|
0.28ms to 4.4s Selectable : 5 kinds of interval registered |
| Nominal value
|
Pre-settable for each measuring mode
|
| Tolerance value
|
Pre-settable each Hi tolerance and Lo tolerance to each displayed values |
| Measuring mode
|
Selectable between 2 point diameters and
3 point gaps.
|
| Data processing
|
Mean value, Max. value, Min.value, Max-Min. value, Moving average, etc. |
| Data output
|
RS-232C, Analog±10V(Option :GP-IB,
Centronics, BCD)
|
| Alarm
|
Hi tolerance over, Lo tolerance over, whithin tolerance: Lamp on relay
output |
| Others
|
Measurement by input signal. Offset. Zeroset,
Calibration etc.
|
| Weight
|
4kg
|
| Power Source
|
AC85V - 264V 50/60Hz 30VA
|
Standard accessories
- Connecting cable between transmitter and
receiver ··········
1
- Connecting cable between sensor and display(4m)
··········
1
- Power cable (2m) ·························································
1
- Operation Manual ·························································
1
Options
- Transparent object measuring function
- Multi-segments measuring function of outer
diameter and gap.
- BCD,Centronics & GP-IB interface
- Dustproof hood(for protection against dust)
- Design & production of measureing line
[Back to home]
[Back to LMG home] |